5 Basic Precautions for Repairing Hydraulic Brakes

A passenger vehicle’s hydraulic brake system consists of the brake pedal connected to a master cylinder, a push rod, hydraulic lines, and a brake caliper assembly. It uses a glycol-ether or diethylene-glycol based brake fluid to transfer pressure from the controlling mechanism to the actual braking mechanism. The disc brakes that are in your master cylinder push against the brake rotor which causes our cars to stop.

If you reckon that the tires are the top car part that is most tired, then the car brakes are probably at 2nd place. We all know that stopping is as important as moving. That is why there is never a person in his/her right mind who will volunteer to drive or ride a car that doesn’t have brakes, right? So eventually, because of frequent use and wear, our car’s brakes will eventually be in need of some repairing.

For the two decades that Rapid Car Removal has been a leading car removal and cash for cars company in Melbourne, we have handled lots of cars that have been severely damaged and totally wrecked because of busted and decrepit brakes. And believe us, you wouldn’t want to see yourself in that situation. With this, we ought to provide you with some expert advice that could help if your hydraulic brake system is now in need of immediate fixing. Whether you’d be doing it on your own or with the help of a trusted mechanic, these 5 basic precautions must still be observed:

Use the correct set of tools and safe working practices.

The improper use of tools and equipment in auto repair can lead to vehicle damage, or worse, personal injury. So to avoid those unfortunate scenarios, make sure that all you’re using are perfect and correct for the job. Check the diagram of your vehicle’s brake system in the manual. It’ll lead you in the right direction if you prefer to really do this alone. Allow the brakes to cool first before starting anything. Use fender covers to protect the other parts of your car from the brake fluid. If your car has an ABS, make sure that its brake system is depressurized before you open the hydraulic system. Always remember to get professional help once you realize that you don’t really know what you’re doing.

Be sure about the signs that tell you your car brakes need a fix or replacement.

Sure, you do want to get your hands dirty and you have some experience in fixing cars. But before you get all excited and worked up, make sure that it is really your car’s brakes that are in need of fixing. Like oftentimes, repairing the hydraulic brake system isn’t the outright solution; sometimes it’s just a matter of replacing the brake fluid. So, check for noises during driving and braking. Double-check if there’s any pulling or pulsation while using the brakes. Feel if it’s taking too long than usual for you to be able to stop your car. Inspect your vehicle properly and thoroughly before resorting to an actual repair or replacement.

Check the brake fluid before doing anything.

Like what we said, more often, cars only need to have the brake fluid replaced. So as a prerequisite, check it first before starting any kind of repair. Sometimes you need to add more and sometimes you just need to change it. Never reuse a brake fluid from an open container. If your brake pedal needs to be pushed further down to the floor in order to pull off a hard or quick stop. Then chances are you just need to add more brake fluid. Double-check the label if you are using the correct type of fluid.

Choose the replacement parts wisely.

Once you have confirmed that the hydraulic brake system indeed needs a repair, most likely, it will require you to replace some parts like the rotor or brake pads. With that, you always have two choices. To go with the brand and type of part that your car manufacturer has recommended; or, you may select according to your preference. Just remember, when in doubt, always go with the manufacturer suggested parts. It will lessen the chances of ending up with more faulty car brakes.

Test multiple times after repairing.

Many auto technicians and mechanics practice a regular test-drive plan always before and after fixing brake systems. You should do the same as well. Right after fixing and replacing the parts of your hydraulic brakes, drive it off to a safe place to test if you have indeed done and finished it correctly. Drive it for at least 15 minutes and at different speeds. Brake pedal distance needs to be check and feel if it still needs to be adjusted. You may repeat if necessary. Just try both gradual and hard stops.

“I’m actually decided to sell my car Melbourne because the cost to repair the brakes and other engine parts are simply overwhelming.” If that’s your case, there’s no need to worry. Rapid Car Removal is here to take all your headaches and stresses away. We are trusted car wreckers in Melbourne who have been in this industry for more than two decades. Our long list of loyal customers loves the fact that we take their old and damaged cars for free and in addition, we still pay them to top instant cash for letting us take their vehicles. So save yourself from that dilemma and call our friendly operators now! Dial 0438 942 754 to have your car picked up today.